South Molton, North Devon
Boiler Servicing in South Molton
South Molton is a rural market town, and the EX36 postcode reflects that character. The town centre around the Square and East Street has older stone and Victorian terraced housing. The streets off Mo
Boiler Servicing in South Molton
South Molton is a rural market town, and the EX36 postcode reflects that character. The town centre around the Square and East Street has older stone and Victorian terraced housing. The streets off Molton Cross and beyond the town boundaries quickly give way to farmhouses, cottages, and converted agricultural buildings — many of them off the mains gas network and running on LPG or oil.
I'm based in Barnstaple, 25–35 minutes from South Molton, and I cover the town and surrounding EX36 area as a regular part of my rounds. I'm George Lane, Gas Safe registered with over 25 years of experience, and I work on both mains gas and LPG-fired boilers. Annual servicing in a rural market town like South Molton matters more than many homeowners realise — older housing with older heating systems benefits more from a trained eye once a year than newer properties with boilers still inside their warranty window.
That said, the warranty argument applies equally to South Molton homeowners with newer boilers. Worcester Bosch, Vaillant, Baxi, and Ideal all require annual Gas Safe servicing as a condition of their extended warranties. Miss a year and the warranty may not be honoured when you need it.
Why homeowners in South Molton choose me
Gas Safe Registered
Legally required for all gas work. Reg: 515374 — verify at gassaferegister.co.uk.
25+ Years Experience
All major brands: Worcester Bosch, Vaillant, Baxi, Ideal, Glow-worm, Potterton.
Transparent Pricing
Fixed price after diagnosis before any work starts. No hidden fees.
Same-Day Where Possible
Based in Barnstaple, covering all of South Molton and surrounding areas.
What Happens During a Boiler Service in South Molton
Every service is carried out to the standards in BS 6798. Here is what I check:
Common faults I fix in South Molton
- Gas or LPG pressure and flow rate — for LPG properties, I verify the cylinder pressure is within range and confirm the boiler is receiving adequate supply. Low gas pressure on LPG systems is often the first sign that a cylinder is approaching empty or a regulator needs attention
- Burner inspection and cleaning — removed, inspected for carbon deposits and debris, and cleaned. A dirty burner is the most common single cause of reduced combustion efficiency
- Heat exchanger inspection — checked for corrosion, scaling, or cracking. On older rural properties where system water has never been properly treated, scaling in the heat exchanger can be significant
- Flue gas analysis — using a calibrated analyser to measure CO levels, CO/CO₂ ratio, flue gas temperature, and net combustion efficiency. This is the safety check that nothing else replaces
- Ignition electrode and spark igniter — checked and cleaned. Worn electrodes cause ignition fault codes (Worcester F28, Baxi E133, Ideal F1, Vaillant F28). On older boilers, these are often overdue for replacement
- Flame sensor — cleaned at every service to prevent lockouts
- Condensate trap and pipe — checked for blockage. In South Molton properties where the condensate pipe runs through an unheated utility room or outbuilding, freezing in winter is a real risk. I'll advise on insulation if this is a concern
- Expansion vessel pressure — checked and re-pressurised where needed
- Safety device tests — overheat thermostat and high-limit cutouts tested
- Inhibitor concentration test — water sample tested per BS 7593
- Pipework visual inspection — accessible pipes checked, particularly important in older properties with mixed pipework materials
- Full operational test — boiler run through heating and hot water cycles
- Signed service record issued on the day